Gas/Oil System Cleanings

Check the operation of the thermostat and operate the heating system
Verify the function of limit switches safety controls
Check all electrical wiring & circuits associated with the system
Visually inspect burners and burner tubes
Inspect all motors associated with the heating system.
Test capacitors functionality and ratings
Verify pressure switch functionality and clean pressure switch tube
Verify operation of the condensate pump, clear associated drains (if applicable)
Inspect ignition components and gas valve operation
Inspect exhaust venting
Perform heat exchanger safety camera inspection
Check standard one-inch air filter, if applicable
Check system airflow and measure temperature rise across the heat exchanger
Complete a full combustion efficiency test and print results
Complete a safety check for carbon monoxide in the ductwork
Inspect heat exchanger for signs of corrosion, fouling, structural problems (e.g., cracks, perforations, and bulges), and erratic flame operation during blower operation
Inspect the burner blower wheel to ensure it is clean
Measure, record, and adjust manifold pressure as necessary
Inspect the integrity of all accessible duct work including: duct strapping, hangers, sections, joints, seams and filter area
Inspect all vent connectors for rust discoloration, leaks, or signs of condensate
Tag all applicable valves and switches to ensure the homeowner knows what each is for.